Download Analog Devices USBi (programmed) DriverUSBiDownloadAnalog
  • We are happy that the freeDSP-aurora with 8 inputs and 8 outputs, USB Audio Class 2 and wireless control via Wifi and Bluetooth was successful on KICKSTARTER.

  • The freeDSP is an open-source digital signal processor family for the do-it-yourself community. The applications range from active loudspeaker concepts (digital crossovers, bass enhancement, ...) and room equalization over advanced musical effect processors to car audio signal processing.

  • No advanced coding skills are necessary. The freeDSP works with a graphical development environment. The programming model is function-block based. Just drag-and-drop some processing blocks and virtual cables - and you are ready to go! The Windows based software can be downloaded from Analog Devices free of charge.

  • All freeDSP boards are published under a creative commons license (CC-BY-SA). It allows the unrestricted use and modification of the module. We would be happy if you join the team and improve or extend the freeDSP family. We really like the open hardware idea. :-)

Download Analog Devices Usbi (programmed) Drivers

I'm having the same problem with the USBi programming on Windows 10 64-bit (showing 'Compiled. Comms Failed' after several seconds of 'Active Dowloaded' in SigmaStudio) with several hardware (freeDSP, Sure / Wondom DSP JAB3, tested all USB ports). Programming works fine on a Win 8.1 32-bit system with the same setup. Thanks and best, AkBak. Did these come with the Linux driver? Are you using Linux? If this is the case then this may be a Linux issue. When you use SigmaStudio and the USBi to program the part directly from SigmaStudio, have a look at the Capture window. In that window you will see what SigmaStudio does to program the part. There is timing information there as well.

Coments are closed
Scroll to top