EVAL-ADF4351EB1Z
  1. Analog Devices Rfg.l Eval Board Driver Download For Windows 8
  2. Analog Devices Rfg.l Eval Board Driver Download For Windows 10

That Analog Devices RFG.L Eval Board connected is displayed at the top of the window. Otherwise, the software has no connec-tion to the evaluation board. The evaluation board can be connected and disconnected while the software is running. Note that when connecting the board, it takes about 5 seconds for the status label to change. ACE Evaluation Board Plug-ins. If the machine that ACE is installed on has internet access, you can find/install/update plug-ins directly from the ACE application. For environments without internet access, you can download these plug-ins to portable storage and install them into ACE. 'Select USB Device to Program.' If 'No Boards Found' is displayed, the user should locate a file called 'DriverGuide.mht' located in the following directory for instructions. On how to associate an unknown evaluation board with ADI's software: C: Program Files (x86) Analog Devices USB Eval Board Programmer.

Clock & Timer Development Tools Evaluation Board I.C.
Analog Devices
PLL Synthesizers / Multipliers / Dividersr
1.EVAL-ADF4351EB1Z.pdf (20 pages)
yes
Evaluation Boards
ADF4351
250 MHz, 4.4 GHz
3.75 V to 5.5 V
Self contained board including PLL, VCO, loop filter 35 kHz, 25 MHz TCXO reference
USB
110 mA
Driver
1
  • Current page: 1 of 20
One Technology Way • P.O. Box 9106 • Norwood, MA 02062-9106, U.S.A. • Tel: 781.329.4700 • Fax: 781.461.3113 • www.analog.com
Self-contained board including PLL, VCO, loop filter (35 kHz),
Accompanying software allows control of synthesizer
Choice of power supply via USB or external feeding
Typical phase noise performance of −104 dBc/Hz @ 3 kHz
EVAL-ADF4351EB1Z
CD that includes
PC running Windows XP or more recent version
Oscilloscope (optional)
WARNING AND LEGAL TERMS AND CONDITIONS.
regulators
offset from carrier (1 GHz output frequency)
Self-installing software that allows users to control the
Electronic version of the UG-435 user guide
Evaluation Board for the
ADF4351
ADF4351
Figure 1. EVAL-ADF4351EB1Z
Fractional-N PLL Frequency Synthesizer
Analog devices rfg.l eval board driver download for windows 8
ADF4351
Analog Devices ADF435xPLL software (Version 4 or higher)
GENERAL DESCRIPTION
This board is designed to allow the user to evaluate the perfor-
loops (PLLs). Figure 1 shows the board, which contains the
the output signal, power supplies, a reference oscillator, and an
USB connector. There is also a loop filter (35 kHz) on board.
The evaluation board is set up for a 25 MHz PFD comparison
frequency. An on-board TCXO provides the 25 MHz reference
The package also contains Windows® software (XP or later) to
Evaluation Board User Guide
integrated synthesizer and VCO, SMA connectors for
frequency synthesizer for phase-locked

EVAL-ADF4351EB1Z Summary of contents

Page 1

... The evaluation board is set up for a 25 MHz PFD comparison frequency. An on-board TCXO provides the 25 MHz reference frequency. The package also contains Windows® software (XP or later) to allow easy programming of the synthesizer. EVALUATION BOARD Figure 1. EVAL-ADF4351EB1Z Rev Page UG-435 frequency synthesizer for phase-locked ...

Page 2

... Power Supplies .............................................................................. 4 REVISION HISTORY 6/12—Revision 0: Initial Version Evaluation Board User Guide Input Signals...................................................................................4 Loop Filter ......................................................................................4 Output Signals ...............................................................................4 Evaluation Board Setup Procedure .................................................5 Software Installation .....................................................................5 Evaluation Board Software ...............................................................9 Evaluation and Test ........................................................................ 11 Evaluation Board Schematics and Artwork ................................ 12 Ordering Information .................................................................... 17 Bill of Materials ........................................................................... 17 Rev Page ...

Page 3

... Evaluation Board User Guide QUICK START GUIDE Follow these steps to quickly evaluate the 1. Install the ADF435x software from the CD. 2. Connect the EVAL-ADF4351EB1Z the necessary drivers. 3. Follow the hardware driver installation procedure. 4. Ensure that Switches SW1 and SW2 are closed. 5. Run the ADF435x software. ...

Page 4

... ADF4351 is powered. from the external OUTPUT SIGNALS The EVAL-ADF4351EB1Z (differential outputs). The device is quite sensitive to impedance unbalance. If only one port of a differential pair is used, terminate the other with a 50 Ω load. The board contains 7.5 nH shunt inductors on the RF output stages, which is optimum for a frequency range of 1 GHz to 4.4 GHz. Lower frequencies than this require larger output stage inductors Ω ...

Page 5
Analog Devices RFG.L Eval Board Driver Download For Windows

... Evaluation Board User Guide EVALUATION BOARD SETUP PROCEDURE SOFTWARE INSTALLATION The control software and USB drivers for EVAL-ADF4351EB1Z are on the CD, which accompanies the board. If the user runs ADF435x_Setup.msi, then the install wizard guides the user through the install process. Simply follow the on-screen instructions ...

Page 6

... Figure 6. Windows XP ADF435x Software Installation, Confirm Installation 3. Click Next. Figure 7. Windows XP ADF435x Software Installation, Logo Testing 4. Click Continue Anyway. Evaluation Board User Guide Figure 8. Windows XP ADF435x Software Installation, Installation Complete 5. Click Close. Windows Vista/7 Software Installation Guide Figure 9. Windows Vista/7 ADF435x Software Installation, Setup Wizard 1 ...

Page 7

... Evaluation Board User Guide Figure 10. Windows Vista/7 ADF435x Software Installation, Select Installation Folder 2. Choose an installation directory and click Next. Figure 11. Windows Vista/7 ADF435x Software Installation, Confirm Installation 3. Click Next. Figure 12. Windows Vista/7 ADF435x Software Installation, Start Installation 4. Click Install. Figure 13. Windows Vista/7 ADF435x Software Installation, Installation 5 ...

Page 8

... Choose Yes, this time only, and click Next. Figure 15. Windows XP USB Adapter Board Driver Installation, Installation Options 2. Click Next. Note that Figure 15 may list Analog Devices RFG.L Eval Board instead of ADF4xxx USB Adapter Board. Evaluation Board User Guide Figure 16. Windows XP USB Adapter Board Driver Installation, Logo Testing 3. ...

Analog Devices Rfg.l Eval Board Driver Download For Windows 8

Page 9

... Evaluation Board User Guide EVALUATION BOARD SOFTWARE The control software for the EVAL-ADF4351EB1Z the EVAL-ADF4351EB1Z on a CD. To install the software, see the Software Installation section. To run the software, click the ADI ADF435x file on the desktop or in the Start menu. On the Select Device and Connection tab, choose your device, your connection method, and click Connect. Figure 18. Software Front Panel Display— ...

Page 10

... If the background on the text box is green, the value displayed is different from the value actually on the device. Click Write Rx (where write that value to the device. Figure 19. Software Front Panel Display—Main Controls Rev Page Evaluation Board User Guide ...

Page 11

... Evaluation Board User Guide EVALUATION AND TEST To evaluate and test the performance of the ADF4351, use the following procedure: 1. Install ADF435x software. 2. Connect the evaluation board using the supplied USB cable. Follow the hardware driver installation procedure that appears. 3. Connect spectrum analyzer to Connector RF 4. Connect 50 Ω ...

Page 12

... UG-435 EVALUATION BOARD SCHEMATICS AND ARTWORK Figure 22. Evaluation Board Schematic (Page 1) Rev Page Evaluation Board User Guide 10844-022 ...

Page 13

... Evaluation Board User Guide Figure 23. Evaluation Board Schematic (Page 2) Rev Page UG-435 10844-023 ...

Page 14

... UG-435 Figure 24. Evaluation Board Schematic (Page 3) Rev Page Evaluation Board User Guide 10844-024 ...

Page 15

... Evaluation Board User Guide Figure 25. Top Side Figure 26. Layer 2 (GND Plane) Rev Page UG-435 ...

Page 16

... UG-435 Evaluation Board User Guide Figure 27. Layer 3 (Power Plane) Figure 28. Bottom Side Rev Page ...

Page 17

... Evaluation Board User Guide ORDERING INFORMATION BILL OF MATERIALS Table 1. Qty Reference Designator C4, C27, C32, C34 21 C5, C8, C10, C13, C17, C18, C21, C22, C25, C28, C29, C30, C53, C54, C55, C57, C58, C59, C60, C61, C69 10 C6, C7, C14, C15, C16, C19, C20, C23, ...

Page 18

... UG-435 NOTES Evaluation Board User Guide Rev Page ...

Page 19

... Evaluation Board User Guide NOTES Rev Page UG-435 ...

Page 20

... Evaluation Board for any other purpose. Furthermore, the license granted is expressly made subject to the following additional limitations: Customer shall not (i) rent, lease, display, sell, transfer, assign, sublicense, or distribute the Evaluation Board; and (ii) permit any Third Party to access the Evaluation Board. As used herein, the term “ ...

Analog Devices Rfg.l Eval Board Driver Download For Windows 10

Related keywords

  • EVAL-ADF4351EB1Z datasheet
  • EVAL-ADF4351EB1Z data sheet
  • EVAL-ADF4351EB1Z pdf datasheet
  • EVAL-ADF4351EB1Z component
  • EVAL-ADF4351EB1Z part
  • EVAL-ADF4351EB1Z distributor
  • EVAL-ADF4351EB1Z RoHS
  • EVAL-ADF4351EB1Z datasheet download
Coments are closed
Scroll to top